rs07b - m surface mount fast rectifiers publication order number: [ rs07b - m ] ? bruckewell technology corporation rev. a - 2014 features ? glass passivated device ? ideal for surface mouted applications ? low leakage current ? metallurgically bonded construction ? high temperature soldering: ? 250c/10 seconds at terminals ? rohs compliant package m echanical d ata ? case: sod - 123 m olded plastic ? epoxy: ul94v - o rate flame retardant ? lead: lead formed for surface mount ? polarity: color band denotes cathode end ? mounting position: any packing & order information 3,000/reel graphic symbol maximum ratings and electr ical characteristics rating at 25 c ambient temperature unless otherwise specifie. single phase, half wave, 60 hz, resistive or inductive load for capacitive load, derate current by 20% rs 07 b rs 07 d rs 07 g rs 07j rs 07k rs 07m unit device marking code rb rd rg rj rk rm maximum recurrent peak reverse voltage v rrm 100 200 400 600 800 1000 v maximum rms voltage v rms 70 140 280 420 560 700 v maximum dc blocking voltage v dc 100 200 400 600 800 1000 v maximum average forward rectified current ta=65 c ( note1) i f(av) 0.7 a
rs07b - m surface mount fast rectifiers publication order number: [ rs07b - m ] ? bruckewell technology corporation rev. a - 2014 rating at 25 c ambient temperature unless otherwise specifie. single phase, half wave, 60 hz, resistive or inductive load for capacitive load, derate current by 20% rs 07 b rs 07 d rs 07 g rs 07j rs 07k rs 07m unit device marking c ode rb rd rg rj rk rm peak forw ard surge current 8.3ms single half - sine - w ave superimposed on rated load tl=25 c i fsm 20 a typical thermal resistance ( note2) r ja 1 80 k/w maximum reverse recovery time ( note3) trr 150 250 500 ns operating temperature range t j - 55 to +150 c storage temperature range t j ,t stg - 55 to +150 c notes 1.averaged over any 20 ms period. 2.thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal. 3.measured with if=0.5a, ir=1a, irr=0.25a electrical characteristics symbol parameter min typ max unit v f maximum instantaneous (note4) f orward voltage at 0.7a -- -- 1.15 v i r maximum dc reverse current @ta=25 c a t rat ed dc blocking voltage @ta=125 c -- -- 10 50 v cj typical junction capacitance (note5) -- 4 -- a notes 4.pulse test:300s pulse width,1% duty cycle. 5.measured at 1.0mhz and applied average voltage of 4.0v dc.
rs07b - m surface mount fast rectifiers publication order number: [ rs07b - m ] ? bruckewell technology corporation rev. a - 2014 rating and characteristic curves fig. 1 forward derating curve fig. 2 peak junction capacitance fig. 3 typical forward characteristics fig. 4 typical reverse characteristics
rs07b - m surface mount fast rectifiers publication order number: [ rs07b - m ] ? bruckewell technology corporation rev. a - 2014 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. bruckewell technology inc., its affiliates, agents, and employe es, and all persons acting on its or their behalf (collectively, bruckewell), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, bruckewell disclaims (i) any and all liability aris ing out of the application or use of any product. (ii) any and all liability, including without limitation special, consequential or incidental damages. (iii) any and all implied warranties, including warranties of fitness for particular purpose, non - infri ngement and merchantability. statements regarding the suitability of products for certain types of applications are based on bruckewells knowledge of typical requirements that are often placed on bruckewell products in generic applications. such statemen ts are not binding statements about the suit ability of products for a particular application. it is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. parameters provided in d atasheets and/or specifications may vary in different applications and performance may vary over time. product specifications do not expand or otherwise modify bruckewells terms and conditions of purchase, including but not limited to the warranty expres sed therein.
|
